How to get rid of volume warning?

I have a bluetooth speaker that I use on occasion. I have tasker set up so that when I connect the speaker it automatically loads pandora on my phone, waits a few seconds, then sets media volume to max (15). However, it doesn't seem to be able to set the volume up high enough and I think it's because of the volume limit and the warning. Is there any workaround for this without rooting right now?

from xda-developers http://ift.tt/1LCRvWS
via IFTTT

[KERNEL][MM][6.0.X]ELiX1R-KERNEL

Code:

---

Since You are seeing this post then you are no longer concerned about your mobile warranty
/*You are solely responsible for what you see here and what you do with your device.
*
* I am only here to share my project and to see if it help other people and am really grateful that you are reading this.
* Anything done wrong by yourself will not be my fault so understand it but you will get help if needed.
* You are choosing to make these modifications to your device and am not arousing you in any way, and if
 * you point the finger at me for messing up your device, than you will be trolling me :rolleyes:.
/*

---

Features :

• Faux sound V3.0 (Awesome for all the music lovers now control the sound of your device by the way you want. Needed App like Kernel Auditor to enable it.)
• Fast USB Charge Added ( Super Fast Charge your phone with the PC and USB. Needed App like Kernel Auditor to enable it.)
• Supports OTG
• Vibration Control Feature(Set the Vibration Intensity at your will. Needed App like Kernel Auditor to enable it.)
• Custom Governors Added(Needed App like Kernel Auditor to Use default Governor as you like.)
• Color Intensity Control(Change your Color Intensity as you like. Needed App like Kernel Auditor to change the intensity it.)
• Init.d support added in the kernel.
• Balanced for daily use Whether for High Gaming or for Normal Use
• Powersuspend Feature.
• Added Fast ShutDown
• Added I/O Scheduler (noop,deadline,row,cfq,bfq . Needed App like Kernel Auditor to change the default Scheduler.)
• F2FS Support.
• Z-ram Support.

ChangeLogs :
For Complete list of ChangeLog go here : ChangeLogs

SourceCode :
Kernel Sources : http://ift.tt/1LCRvWO

Download Links:
AndroidFileHost/GoogleDrive

Installation Instruction :

• Download the Zip/Img and place it in your Internal/External Memory.
• Reboot your Device to recovery.
• Flash the file which you downloaded earlier.
• Wipe Cache and Dalvik Cache.
• Reboot the device.

Quote:

Note : First backup your boot.img file either through recovery or by any app or take any boot.img(Kernel file) which works in your device as a backup plan if anything happens just fallback to the previous Kernel.

XDA:DevDB Information
ELiX1R, Kernel for the Xiaomi Redmi 2

Contributors
abhisri1997, abhisri1997, ketut.kumajaya, Deadpool_01,ashish94,Tarun93,salahXDA6805
Source Code: http://ift.tt/1LCRvWO

Kernel Special Features:

Version Information
Status: Stable
Stable Release Date: 2016-03-22

Created 2016-03-22
Last Updated 2016-03-22

from xda-developers http://ift.tt/1MyR3Ut
via IFTTT

xposed not working

I have mobile j500h .. and when instal xposed .. it stop on samsung screen can help me

from xda-developers http://ift.tt/1MyR5vo
via IFTTT

Doubts On Turbo Charging and Battery Life on the MOTO X FORCE

Hey Folks...

I had bought the Droid turbo 2.. or MOTO X Force as known in India 2 days back.
The first time I charged the Phone - Switched it off - Connected the turbocharger ( that comes along with the Device) it took me approximately 1.30 - 2 Hours to full charge it from 5% to 100% .. It did show turbo charging on the screen.

What was strange is next instance I plugged it in at 35% it took 1 hour and charged only up to 65%. This charging was done with the phone ON unlike the first charge where I had switched it OFF. It took about 2-3 hrs to full charge the device. Though it did show turbo charging when plugging in.

I felt this was strange. I again did a charge yesterday where it took 3 hrs to charge from 27% to 65% though it showed turbo charging.
In the night I switched the device off at 28% and plugged it in.. it was fully charged in probably 1-1.10 hrs max.

Am I to understand that the phone actually turbo charges only when switched off?
I have read in a couple of places that beyond 80% it charges at the normal rate. But I noticed this slow charge way before that Threshold.

Also I get a screen ontime of roughly 4.30 to 5.30 as of now.
also I noticed that last night when I went to sleep I had switched the WIFI off and Data, But I woke upto a 8% drop in the battery.

Could you guys share your thoughts and experience with the device.
This turbo charging issue is it the device or the Charger which is at fault here? I will need to replace if any of them are at fault.
Also what is the average SOT you guys get? and does your device hit temperatures of 45 deg C?


Do help out..

Thank you in Advance.

from xda-developers http://ift.tt/1LCRt1g
via IFTTT

Custom ROM for Galaxy S6 AT&T

Hey, this is my first thread so I have no clue what I'm doing :D

Anyways, does anyone know any good custom ROMs for the Galaxy S6 AT&T version? I found stuff for different carriers, but very few for AT&T and the ones I found, I didn't like.

Also, lets say I rooted my phone and installed a custom ROM (God, I hope I am using the right vocab), that would void my warranty, but what if I "unrooted" it and went back to the original software? Is there a way Samsung would know?


Sorry, if I'm speaking in layman's terms lol I switched from iPhone couple months ago, and I love what I can do with my galaxy but I just want to do more.

Thanks!!

from xda-developers http://ift.tt/1MyR3Um
via IFTTT

Samsung Galaxy S5: Android 6.0.1 Marshmallow update rolling out to users in South Kor

Samsung has started rolling out the latest Android 6.0.1 Marshmallow update for Galaxy S5 users in South Korea.
Source

from xda-developers http://ift.tt/1LCRvWK
via IFTTT

Recovery can't find any file, can't install any zip file

After I got my nexus 5x, I unlocked bootloader and root, and finally I go back official stock 6.0.1. But the camera didn't work fine(sometimes black screen, and then phone reboot). Have to flash CM13.

Following the guide, I did those steps strictly. Yet failed.

- When I tried to install CM13.zip, the TWRP told me I had to decrypt , and need to enter the default password which I don't know/have.
- I tried another way, flash official recovery.img . Failed again: the official recovery told me "can't mount SDcard", update zip file from sd card failed.

How can I install CM13 now? Or, how can I solved the camera issue?

I feel terrible about this, could you guys help?
:mad:

thank you

from xda-developers http://ift.tt/1LCRvWI
via IFTTT