Sprint Marshmallow OTA is up

Downloading now. 1362.41mb download.

from xda-developers http://ift.tt/1RisaBX
via IFTTT

libc.so not found error on booting time

libc.so not found error on booting time in my laptop what to do friends i'm face this error since last night give suggestion

from xda-developers http://ift.tt/1MDI04z
via IFTTT

Huawei Mediapad T1 8.0 custom rom

Hey guys!

I've just got my Huawei Mediapad T1 8.0 8gb only wifi tablet and I was sorry to see that the newest official Android is 4.3, so I would like to install some custom ROM
I'm thinking about 5.1 but the newer the better. So far I found one or two.pages on google but they didn't look trustworthy, they had screenshots of phones, the articles referred to the device as phone, and I would.like to.avoid an scam or damage to my tablet. My question is do you think that there's some great newer android for my device?

Thanks for any help! :)
oszvald42

from xda-developers http://ift.tt/1Ris6ly
via IFTTT

Wrong Information for UB Code

Good Morning guys,
I plan to unlock my bootloader in the next few days. But I don't want to type in my real imei number, because if I have to send the phone in they might check and regret warranty.
So: Is ist possible to type in bull**** in the form or is the unlock code generated via the imei and I risk hard bricking the phone? And is there a counter which says that it was once unlocked if it is locked atm?

Thanks In advance :)

from xda-developers http://ift.tt/1MDHWBR
via IFTTT

My Gmail account doesn't seem to be showing up

Hi everyone,

I recently bought a Z5p and set everything up, logged into Gmail, my emails are there, my contacts are there but the pull down menu doesn't show me as the user and my texts aren't showing my account info in Google messenger. I've read over the forums and haven't found anything, anyone have an idea?

Thanks
Nick

from xda-developers http://ift.tt/1Ris7Ga
via IFTTT

S5 Sensation ROM v10.0 got stuck on Wiping Data in Samsung Galaxy S3 i9300

I am rooting my Samsung Galaxy S3 i9300 and installing S5 sensation Rom in it using TWRP. But it got stuck in Wiping Data at 41% of installation and it now going further from more than 30 minutes. What should I do now?

Please help

from xda-developers http://ift.tt/1Rz379s
via IFTTT

Why Complex Designs May Hurt Mobile App Development

There are a lot of persons involved in the conception and design phase of app creation – the designers, developers, clients, managers and marketers to name a few. Not everybody has got coding knowledge. Most are not even aware of the app development processes.So my conern is that complex design of mobile app affect its development

from xda-developers http://ift.tt/1T79BSh
via IFTTT

need help with nexus player

I just bought the nexus player from a shop on ebay. I plugged it in and it went straight to the home screen. After going into settings and saying perform factory reset it wont load anything. (no signal) I have tried to get my windows 10 computer to recognize it. However, it shows up briefly as other devices showing moorefield in dev mgr then disappears. I just want ot get this thing back to stock and working any ideas would be helpful

from xda-developers http://ift.tt/1T79zK8
via IFTTT

I need baseband version for my SM-J700F Urgently

I Tried rooting and installing custom rom
eventually messed up then i restored the backup
i went through but it says no simcard inserted
i trried efs pro as well
but no success
please help

from xda-developers http://ift.tt/1XP3z8j
via IFTTT

OK google

Hey guys I am on the latest garak build. The 3-23 build with arm64 6.0 nano gapps from opengapps.org and I keep getting this error and lost at how to fix this. Whenever I do a reboot this error shows. Any ideas to how to fix this.

Attached Thumbnails

 

from xda-developers http://ift.tt/1T79zdn
via IFTTT

need help to restore my moto g

hello guys i convert my moto g xt 1033 to GPE to flash miui , i also flash miui rom , but due to some bugs in ROM i want to go back to my stock Indian 5.1 LP so goto recovery and format system then copy my nandroid back from PC to phone then try to restore ,restore completed but phone struck at boot loader unlock warning .pllzzzzz help guys ...please

from xda-developers http://ift.tt/1XP3xNG
via IFTTT

How do I enable Neon?

Well like the title says, I am looking to enable neon with CM-13 when compiling from source. I seem to have most LD optimizations where I would like but I am finding nothing on neon. Any dev help would be great!

from xda-developers http://ift.tt/1T79yWA
via IFTTT

Cant find an unsecure kernel for HTC One MAX (International ROM)

Dear XDA members,

I recently decided to root my HTC One MAX and finally did it, went through all the steps mentioned in this guide (until the NAND backup step) as I didn't want to flash the unsecure kernel for the SPRINT version.

Device Info: (btw, I had Korean apps installed on my phone so it might be a Korean variant)

Quote:

Android Version: 5.0.2 HTC Sense Version: 6.0 ROM version 4.14.709.10 Software number: 4.14.709.10 HTC SDK API level 6.55 Kernel version: 3.4.10-g220dd1b and@AABM #1 SMP PREEMPT Baseband version 4T.36.3218.06_10.33R.1718.01L Build number: 4.14.709.10 CL525693 release keys

Quote:

fastboot getvar all result: version: 0.5 version-bootloader: 2.49.0000 version-baseband: 4T.36.3218.06 version-cpld: None version-microp: None version-main: 4.14.709.10 version-misc: PVT SHIP S-ON serialno: ************ imei: *************** meid: 00000000000000 product: t6ul platform: HBOOT-8064 modelid: 0P3P52000 cidnum: HTC__621 battery-status: good battery-voltage: 4179mV partition-layout: Generic security: on build-mode: SHIP boot-mode: FASTBOOT commitno-bootloader: dirty-d0e3b226 hbootpreupdate: 11 gencheckpt: 0 all: Done!

Recovery installed: TWRP
I attached the Boot partition backup below.

After trying to acquire S-OFF unsuccessfully.
Tried rumrunner but failed here is the log:

Quote:

==================== rumrunner S-OFF 0.5.0 ============================== rumrunner S-OFF comes with NO WARRANTY (express or implied) and NO GUARANTEE OF FITNESS for any particular task. We have made every effort we can to make this a safe process for users however the authors disclaim any liability for damage to your phone or other materials or devices used during this process. The entire risk of running rumrunner S-OFF lies with you, the user. By using this software you acknowledge and accept that the authors are not liable for any loss, material or otherwise howsoever caused. Do you understand the implications of this warning? (Yes/No) y Type 'Yes' or 'No' (Yes/No) yes Type 'Yes' or 'No' (Yes/No) Yes Dear User: We will expect that YOU: (1) Know how to use ADB and FASTBOOT binaries ---- [Yes, use these tools to test USB connection BEFORE running rumrunner] ---- (2) Realize that rumrunner S-OFF cannot support every CUSTOM rom in this world (3) Understand that irc support IS NOT A GENERAL HELPDESK (4) Are able to identify and download the CORRECT package for YOUR device (5) Know how to enable USB-debugging on YOUR device (Yes, do that now) (6) Understand that you may NOT repack or redistribute rumrunner S-OFF Ok? (Yes/No) Yes !! Do NOT for any reason taunt, unplug, drop, eat or pet your device !! Please wait.... .......... Checking for updates...... Test 1: Rebooting into bootloader Waiting for fastboot (8/120) Waiting Test 2: Booting device Waiting for ADB (71/120) must ferment longer... must sanitize, skunky rum is nasty hold please............................................ .. [------------------------------------------------------------] Rebooting into bootloader (again) Waiting for fastboot (8/120) Waiting for ADB (72/120) must ferment longer... chilling.................. it's a little stinky here, hmm.... bottles are packed, here we go, shhhhhh.... hmm, cap is on tighter than I expected........ hell, that damn cap is on REALLY tight....... unfortunately this isn't going to work out with your configuration. you have 2 options: 1.) flash an unsecure kernel that's compatible with your ROM and retry rumrunner (preferred and most reliable method). 2.) flash a different rom. NOTE: No amount of messing around with su binaries and apk's is going to fix this issue for you!!!. Better luck next time!!!!bye Press ENTER to exit

Then I tried to use Firewater ( firewater guide ) with and without Temproot and still no luck.

After that I found ElementalX and I downloaded the version for HTC M7 (ElementalX-m7-22.3-Sense) (I checked on gsmarena.com that they have the same CPU and GPU and thought that it might work) but my phone went into a bootloop. Thankfully right before the flash i made a new NAND backup.

But before restoring I decided to test out the sprint version of the unsecure kernel (Sprint_One_Max_1.16.651.4_Unsecure_kernel), but my phone was still in boot loop.
Then I found another kernel (T6_Insecure_Kernel) from link (Guide) I extracted the boot.img from the International folder, rebooted to fastboot and via adb did the fastboot flash boot boot.img command. then my phone once again went into a boot loop. so I had to restore my Boot partition from my NAND backup to fix it.

So now I am asking of anyone can direct me in the right direction or provide a proper unsecure kernel for my HTC One MAX so i will be able to S-OFF and return fingerprint functionality.

Thanks in advance!

Attached Files

2016-03-16--07-26-08_LRX22G_release-keys-sysbackup.7z - [Click for QR Code] (6.51 MB)

from xda-developers http://ift.tt/1XP3tNR
via IFTTT

Samsung Galaxy S2 i9100 Won't do absolutely nothing.

I have a certain problem with my Samsung Galaxy S2. It's a bit old now, It has about 4 years with me. A couple of days ago, I was charging my phone and it was a bit hot. And I recieved a call. I answered it, and the phone went black. I tried turning it on and, nothing. All it showed was a blue screen with a black circle on the top left corner. The phone hasn't gotten any bumps or has fallen out of my hands or anything of that nature. I decided to turn it off, take out the battery and not touch it for a day. I placed back the battery the next day and, this time, nothing shows up. Today, I decided to use it again, and connect it to my laptop, and the laptop detected it. I really don't know what to do. Is there a fix for this problem? I'd appreciate your help. Thanks.

from xda-developers http://ift.tt/1LIJUGb
via IFTTT

Can't delete files from SD card on rooted Galaxy Tab S?

I have a Samsung Galaxy Tab S 10.5 with root access. I have some files that I cannot delete from my SD card. When moving large video files, I'll often pull the SD card out, install it into my computer, and move the files that way, rather than through the USB cable, as the transfer is much faster. The files in question, that I cannot delete, are all files that were transferred this way. Why would these files be locked in this way?

I haven't checked yet, to see if I can put the SD card back into my computer and delete them from there. I'll check tomorrow to see if that works. If not, I'll have to format my SD card in order to get rid of the files. This seems pretty strange.

Has anyone else ever experienced anything like this or have any sort of explanation for it?

Thanks.

from xda-developers http://ift.tt/1RmHdqM
via IFTTT

[Q] Any custom ROM and my phone is laggy, any ideas?

Greetings All,

So I have a strange problem with my One M8, whenever I install a custom ROM (tried them all) the phone lags badly. Even leaving it after a couple of hours and picking it up again the phone just never becomes responsive. So what do I mean by laggy? If I open the app draw, for example, and start scrolling my apps there is a jerking motion to it instead of it being smooth. The same applies when I am moving between home screens.

Does anyone know why this could be happening? I am on the latest firmware for my device which is 6.12.111.4 so I don't think that would be the cause and no matter the ROM I always do a clean wipe and install to try and avoid issues like this.

Any help would be greatly appreciated.

from xda-developers http://ift.tt/22xdYMG
via IFTTT

[APP][4.0+][CoC] ClashHQ [Clan Management]

ClashHQ

Headquarters for all clashers ...



About

ClashHQ is app that every clashers need. It shows valueable clan information without even entering the game. You can view real-time donation rates of your members and even add your many clans and manage them. The app uses COC API which is still in BETA so this app is still in BETA !!!

Screenies

Attachement


Features

* Add your current clan
* Get donation information
* Add your own bookmarks
* HQ updates lets you know whats coming next in clashHQ !! STAY TUNED

Support

Be a part of the bebop community and help it grow and for it to support many features

Google +

Download

Attached Thumbnails

       

from xda-developers http://ift.tt/1RmHava
via IFTTT

LG G4 H810 ATT or PR?

I recently bought a H810 , Its was a cheap deal. The phone had PR ROM in it. I read somewhere the PR rom is fast but has issues.
So I read somewhere the Pr and ATT roms (10o) can be switched and I did that. The ATT rom was working to and gave me update notification for MM. But as I didnt have ATT sim so I pushed it via ADB that shown me failed every time. I reverted to PR rom again to see if PR has any updates.
Anyone can help me to find if the device is ATT or PR or none. ? !! ??

from xda-developers http://ift.tt/22xdVAd
via IFTTT

[2k16] new whatsapp group for yureka & yureka+ user's

Reply your number or msg me at 9103301996

from xda-developers http://ift.tt/1RmH9HG
via IFTTT

Micromax a 121 wifi background scanning

My micromax a121 canvas scanning WiFi even WiFi is off.its consuming 20% battery.I searched in websites.they told me to disable WiFi/advanced/scanning always available.but the problem is "scanning always available". option not there in my jellybean 4.3. Micromax divice.I have rooted my phone but no custom ROMs available for this divice

from xda-developers http://ift.tt/1UIx5yq
via IFTTT

Problem with sony video app

Hi, I have a problem with the app Video Sony, well it turns out that when you activate the option to play the video in the background, when I leave the app just freezes minimized and there is only audio, I remember you could see the video also while using other app because while not use that option and today I wanted to try.

Now if the problem is not because I have root. Someone else that has happened ?, indeed have the latest firmware 3.111. Thanks in advance for your answers.

from xda-developers http://ift.tt/1RmFySa
via IFTTT

New governor android

I want to create a new governor for android kernel. I studied some documentation in Documentation-cpufreq- I don't understand some variables, structs and macros. Where can i find some infos about them? Thank you all!

from xda-developers http://ift.tt/1UIx5yi
via IFTTT

[Q] It's there any way to keep the buttons on the bottom from lighting up?

I can't find the options in the menu and the search is useless. Abby way to keep them from turning on?

from xda-developers http://ift.tt/1RmFwK1
via IFTTT

htc incredible s is dead now,How to solve it?

Dear Team,
I have "htc incredible s" with me.
Phone was not booting since few days back, I was trying to get it resolve but now it even booting in fast-boot or boot-loader.
while pressing the" volume +/- and power " button nothing happen except orange led is blinking .

How to resolve it , Please help me .

from xda-developers http://ift.tt/1UIx4uo
via IFTTT

[TF101] Unable to get into TWRP recovery after upgrading TWRP

Hi,

I rooted using:

OneclickrecoveryV0.4.2

Didn't backup my original stock OS, and couldn't book into an OS.

It was stuck in a loop, used OneclickrecoveryV0.4.2 to fix the loop.

Then it still did not boot into an OS. I put cm-10-20130929-NIGHTLY-tf101.

Worked fine. Wanted to try Katkiss 6.0. Did not seem to work with TWRP 2.5.

Download signed_twrp-2.8.1.1_tf101.zip. Installed it after booting into TWRP 2.5.

It looked successful and rebooted into OS fine. However, after I rebooted it, it is stuck now.

I can't boot into TWRP. It gets stuck at "booting recovery kernel image".

Help...please! I am not tech savvy at all... it took me hours researching to even get to this point...

Did I brick it? :confused:

My girlfriend will be throwing pots and pans at me if I can't fix this :rolleyes:

Thanks in advance...

from xda-developers http://ift.tt/1Zv8A7v
via IFTTT

Me and my HTC Vivid are stuck in Limbo, somewhere between custom ROM and Root.

Here are all of the procedures I followed to see if you can help me any. Believe me, I've tried searching everywhere.

1. I downloaded the latest version of the Windroid toolkit, found here (http://ift.tt/1JdttQL). I saw it worked with HTC Vivid on 4.0.3, which was an old shattered phone I had lying around. That tool is pretty old, so I had no idea what the TWRP version it flashed for me, nor the version of the SuperSU it tried installing. (it downloaded it onto the device but can't install it.)

2. I unlocked the bootloader via the tool, then proceeded to flash the TWRP version it had to the device, it currently works fine (loading into recovery). But I opted not to create a backup for the stock ROM, so that's gone forever. And at this point I can't install the SuperSU because of an error in TWRP "Error executing updater binary in zip" (which I googled extensively to no avail, none of the fixes worked). And for some reason, my computer recognizes when the device is connected, but I can't adb push or fastboot flash recovery "file".img to the phone. I am exasperated and stuck.

Takeaway notes: No stock ROM, Unknown TWRP and Supersu versions. I can't install the SuperSu zip because of "Error executing updater binary in zip". I am not sure how to--if i can--push any other ROMs to my device, because it seems like I can't communicate at all with my device through my PC. Although the fastboot does say "FASTBOOT USB"

This is the stage I'm at. I tried flashing a new image of TWRP, the most recent version that works on my phone, via fastboot. So I have a folder with the adb crap and fastboot crap and the image. I type "fastboot flash recovery twrp.img" and it just goes to the next line without doing anything.

I know this information was all over the place, but I'm not really sure what information you guys need to help point me in the right direction.

Thanks.

from xda-developers http://ift.tt/1Uben2k
via IFTTT

Samsung Galaxy s6 Not registered on network

Okay. so here is what happened. The new marshmallow update for the galaxy s6 came and i downloaded the update and started to install it. it failed at around 30% and rebooted my phone. I decided to try again and i downloaded the update and stll the same,but that's not the issue. after the second update attempt. i rebooted the phone that night and it was fine. but the next morning when i turned on the phone and tries to use my data connection it says not registered on network. My sim card is showing, i tried two different sim cards but the problem is still there. Im within the range of mobile service provider.
So what i did was i cleared the cache partition, the problem is still there.
i Factory reset my phone, the problem is still there.
So, Did anyone else face this problem?
If so, can you tell me how you solved it?
Can anyone help me with this issue.
I thank you in advance

from xda-developers http://ift.tt/1Zv8wo2
via IFTTT

Is this normal

Have a stock t-mobile nexus 6p and I think it's not charging correctly. As you can see it says 3hrs till fully charged. Any ideas

Attached Thumbnails

 

from xda-developers http://ift.tt/1UbeiMf
via IFTTT

[step-by-step]how to port custom roms for your mtk and snapdragon devices☺

::)HELLO guys..I'm here to guide you how to port custom ROMs for your mtk and snapdragon device..this guide is noob friendly.. Just follow the steps as given.:o

NOTE--IM AND XDA TOO NOT RESPONSIBLE FOR ANY DAMAGES FOR YOUR DEVICES..FLASHING CUSTOM ROMS VOIDS WARRENTY
So let's start ..:)


FOR MEDIATECH PHONES

Works for..
MT6589 to MT6577

MT6582 to MT6572

MT6577 to MT6575

Also with SAME SOC LIKE
MT6589 TO MT6589
MT6572 TO MT6572
MT6582 TO MT6582
ETC...


No Need of Source Code

No Need of Kernel Source

No Need of **ANDROID KITCHEN

No Need of LINUX...

Requirements:

* A Brain
* Patience
* Windows XP/7/8
* 7-Zip
* Notepad++
* Bootimg Unpack/Repack Tools for Windows!
* Stock ROM
* And a Little Respect!!

So now Lets Begin...

PORTING For Same SoCs ( Ex: MT6572 to MT6572)

* Replace these from your Stock ROM to the ROM u want to PORT!! Lets Call it "PORT"

*now you need to replace some files from stock to port ROM...first delete them all mentioned from port ROM and then transfer from stock☺



FILES NEEDS TO BE REPLACED.

Code:
*system/vendor
*system/usr
*system/lib/modules
*system/lib/hw
*system/lib/libncurses.so
*system/etc/firmware
*system/etc/vold.fstab
*system/etc/vold.fstab.nand
*system/etc/bluetooth:good:




For Fixing Problems...

Code:
*system/etc/permissions
*system/etc/security
*system/etc/audio
*system/etc/wifi
*system/lib/drm
*system/lisystem/lib/soundfx




* Now Replace the Stock Boot.img to Port ROM!

* Now Open The Port ROM folder and go to META-INF/google/android and open updater-script in Notepad++

* Do the same for the Stock ROM

* Now In the Port ROM's Updater Script, find a line that starts with this...

format(".......

and only replace the mmcblk0p.. with the stock one!

* Do the same for this line...

mount("...

Example:

This is the PORT one!!!
Code:
format("ext4", "EMMC", "/dev/block/mmcblk0p5", "0", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p5", "/system");


This is the Stock one!!

Code:
format("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");


Now just Replace the "mmcblk0p3" from STOCK to PORT!!

It should look like this:

Code:
format("ext4", "EMMC", "/dev/block/mmcblk0p3", "0", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p3", "/system");


DO NOT REPLACE THE WHOLE LINE!:eek:

NOW COME TO THE MOST IMPORTANT PART..WITHOUT THIS STCOSTEP,ROM WILL NOT BOOT UP.

DOWNLOAD FIRST BOOT IMG UNPACK REPACK TOOL...
then you need to create two folder like "stock" and "port"(sometimes the tool caintain both the folder)...

Put the both boot.IMG in their respective folders..(stock boot.IMG in stock and port.boot.IMG in port folder.

Now unpack both the boot.IMG
Then copy and replace the port kernel with stock one..I.e.transfer your stock kernel to port folder..and finally repack it☺☺.

* Now go back to the Folder of Port ROM and You'll see 2 folders & 1 file named

-META-INF
-system
-boot.img

* Now Select these three and Click Right Mouse Button and Click on 7-Zip ->> Add to Archive

* Now a dialouge box should appear!

* Configure the Format like This:

Archive format: ZIP

Compression Level : Normal

Compression Method: Deflate

Dictoioany Size: 32k

Word Size 32

* Now Start Zipping and Push the ZIP to your Memory Card

* Go to Recovery >> Install ZIP & Wipe Data

Finished!!


DONT FORGET TO HIT THANKS TO MY PROFIKE...IF YOU HIT THANKS YOUR ROM WILL 100% BOOT UP😂😂UP😂😂


The ROM porting for snapdragon soc and cross porting on mtk is on my next thread☺☺



CREDITS==
@HERCULES
AND OTHER DEVOLOPERS FROM XDA WHOM I TAKE REFFERANCE.☺☺

from xda-developers http://ift.tt/1Zv8ug4
via IFTTT

How to flash custom recovery(CWM/TWRP) on an already rooted Samsung Galaxy SII (JB)

My phone Samsung Galaxy SII(GT-I9100) is already rooted by flashing CWM-SuperSu.zip file and i want to install custom recovery on it but there's no method besides ODIN ? How would i proceed further

from xda-developers http://ift.tt/1UIsZ9y
via IFTTT

Can't get Boost APNs to stick

My phone is the Boost Mobile XT1526. Running Cyanogenmod 13 by squid2. The latest build.

I've been using the Boost APN found here, and even though it works, its not ideal. I'd rather use the APN that's built into the ROM or the APN I pulled from the stock ROM.

My problem is that, for the life of me, I absolutely cannot get the APNs to stick. The APN that's built into CM13, doesn't stick. It disappears. And if I manually add the APN I pulled from the stock ROM, that disappears as soon as I hit save. I have no clue why. The only APN I can use is the one I linked to above. But that one isn't ideal. But I'll use it if I have to.

Can anyone help me with this that knows more about this then I do? I'd really love to use either the built-in APN or the APN I pulled from the stock ROM, if its even possible.

I have data so that's not my problem. I just can't send or receive MMS messages using the SMS app in Cyanogenmod.

Thanks!

If anything isn't clear then please tell me and I'll try to explain better. I suck at explaining. :(

from xda-developers http://ift.tt/1SiFQvJ
via IFTTT

Need full screen album art on lockscreen

hey mods and devs,
can we get ful screen album art on lock screen like the one in cm 12.1 build .... please help asap

from xda-developers http://ift.tt/1SiFNQw
via IFTTT

Major problems with Google Play

Hey guys. So, I got my BPXL about a week ago, and I instantly loved it. The first thing I did was reinstall all apps from my previous phone. All 180 apps. No issues (except for the -504 problems). Two days ago, I was prompted by the Play Store about some updates. I told my phone to update all apps automatically, but there was a list of about ten items that needed to be updated. "okay, whatever." So I initiated the downloads. About two hours later, I realized that in the notification drawer, the download for the very first app in that list was appearing as paused. Return to the Google Play Store, see what's up, and the download bar is just running running running, but never actually showing any download progress. Paused them all, tried to run them one at a time, same problem. Tried to install a new app, same problem. Tried all of Google's troubleshooting steps, same problem. Here's where it gets real fun: Performed factory reset of phone, same problem. Acquired replacement phone from Amazon, SAME PROBLEM.

Apps can be downloaded and installed from the Amazon Appstore, but Amazon's app market couldn't hold a candle to the Google Play Store. I'm totally at the end of my rope. Google doesn't know what to do, Blu doesn't know what to do, and I have no idea what to do. I have no idea what is causing these issues. Anybody had anything similar happen and know what to do?

from xda-developers http://ift.tt/1UIsWup
via IFTTT

OTA 3/24 - vs98547A

I was just looking on the VZW support website and it appears there is a new OTA update coming today 3/24.

http://ift.tt/1UIsTi7

Anyone that is on stock 46A and takes the OTA, can you verify if this includes WiFi calling capability with Advanced Calling?

from xda-developers http://ift.tt/1SiFNjz
via IFTTT

[Request] Stock boot image

Well, I'm doing some experiments with my device but right now I messed its boot image and now it's stuck on "Sony Xperia" screen when I turn it on. Unfortunately, I can't simply reflash the firmware because Flashtool doesn't work with Xperia M5 yet. And, since I (temporarily) unlocked my bootloader, Xperia Companion/Update Service also refuses to do a software repair (because of the unlocked bootloader). And to close, Sony Emma Service (which is the official tool for devices with unlocked bootloader) simply say there's no firmware available for my variant (E5643). In other words, all I have at the moment is fastboot, and all I need is a copy of boot.img of a working unit in order to "ressurect" my phone.

I'm trying to simply get the boot image from boot.sin but it's in a different format than from previous Xperia devices I worked on and thus it won't work, so, I kindly ask if someone with a rooted Xperia M5 running stock firmare (the firmware version/device variant doesn't matter, it can be from single SIM devices too) could run the following commands from ADB and then upload the file that will be pulled from the phone here:

Code:

---

adb shell su -c "dd if=/dev/block/platform/mtk-msdc.0/by-name/boot of=/data/local/tmp/boot.img"
adb shell su -c "chmod 777 /data/local/tmp/boot.img"
adb pull /data/local/tmp/boot.img

---

Thanks

from xda-developers http://ift.tt/1SiFN35
via IFTTT

[APP][+4.1][ANDROID] Bring Smart Touch Features To Your phone

SmartTouch - Touch it your way

SmartTouch substitute navigation bar ( back button, home, recently app) completely with a movement on screen. You can a finger and move up, move down, move left, move right to perform a corresponding action such as back button, turn off screen, go to home screen, open notification, open recently app, turn on/off flash light, open any application what you want.

Key Features:

With a movement on screen you can:
- Add double tap to lock screen
- Adjust menu app
- Look screen
- Go to home
- Come back screen before
- Turn on/off flash light
- Open notification
- Open recently app
- Open any application you want
- Open list of app you frequently use
- Automatically turn off screen when you put your phone into pocket, and open when you hold it.


All above you can do with a movement

Display settings:
- With SmartTouch you can change color, transparent of list menu what you want and change color, size , position of SmartTouch on screen...

Especially, SmartTouch can work when lock screen, you can open notification, turn on /off flash light without open screen.
Google play : http://ift.tt/1UIsPit
Facebook : http://ift.tt/1UIsRGU
Youtube : https://youtu.be/_WMATre2oZQ

NOTE:
- Some device of Xiaomi or run Miui OS, when opening app first, you must go to security ->choose permission -> permission -> SmartTouch and turn on pop up window. Follow up, you go to security -> Permisson -> AutoStart -> turn on SmartTouch
- If you can not uninstall SmartTouch , please go to settings and find settings admin application and turn off SmartTouch


XDA:DevDB Information
Smart Touch, App for all devices (see above for details)

Contributors
hopnv.1611
Source Code: http://ift.tt/1UIsPit


Version Information
Status: Testing
Current Stable Version: 1.5
Stable Release Date: 2016-03-24

Created 2016-03-24
Last Updated 2016-03-24

from xda-developers http://ift.tt/1UIsRGW
via IFTTT

You guys still alive?

What up what up bruhs.

It's been ages I swear!

from xda-developers http://ift.tt/1UIsOLg
via IFTTT

Problem with DCIM Folder.

Hi,

I have lots of internal storage and SD card storage. But I can't click any pictures using camera. Camera says that there is no internal storage.

I have checked file system with ES file explorer. There is a folder called DCIM, but if I try to explore the folder then its says 'sdcard/dcim not found' and if I try to create a folder called DCIM, it says operation failed.

Please check the screenshots of the camera error and storage space status.

Please tell me how can I fix the DCIM folder?

Thanks,
Gaurab485

Attached Thumbnails

   

from xda-developers http://ift.tt/1Ub6cmI
via IFTTT

What computer application to use to restore my .bak file to my note 4?

I have an unrooted note 4 on 5.1.1 and I created a backup using Wondershare Mobile Go, but when I tried to restore it, none of my files or apps would show up on my phone, even though the program said it finished transferring. And I made sure to set it as the default messaging app
What other program do you guys recommend? Thanks. Also it would be nice if it is free.

from xda-developers http://ift.tt/1XOSQdR
via IFTTT

[ROM] MM_M920P_LamlazyROM_Beta

Hello! My English is not good , you feel the same
Note 5 had 6.0 N920P . Here I summarize for you
Stock rom 6.0 1 file. Flash via Odin

Quote:

ANDROID 6.0 UPDATE 23/3/2016 Model SM-N920P Model name Galaxy Note5 Country Spint (cdma) Version Android 6.0.1 Product code SPR PDA N920PVPU2BPC3 CSC N920PVPU2BPC3 Link Download Google Driver

MM_M920P_LamlazyROM_Beta
Information rom: Lamlazy ROM N920P_MM_Beta
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.0
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 3/23/2016
Created 03/23/2016
Last Updated 23/03/2016
DEV: Lamlazy

Change LOG
Build from the latest 6.0.1 Background stock N920PVPU2BPC3
Delete all of Sprint apps
Remove hands-free activation
Column 4 outlines international song
Icon H + as an international show
Rom international settings like, no one at all related to the network
There are quick toggles in the notification bar 3G
Default: Vietnamese
CSC: XXV
Replan the entire system, eliminating components and junk app
Keyboard Samsung Note 5 6.0 (default type in Vietnamese telex), Browser, Email, Flipboard, ...
Fix did not receive a message to> 160kt
Fix broken head +84 and 09 in any case Call or Sms
3G configuration self Vietnam
Switch 2G / 3G / 4G comfortable not Reset
Logo and sound international launch of Samsung
Activate the multi-user mode
Add the script: Speed ​​up boot, call ring and Proximity delay Disabled, Dynamic Acceleration Wifi / 3G, Google DNS, ...
Good battery original kernel, high stability
Rooted, SuperSU last 2.68
Extremely stable kernel Stock
Rom brings high stability, good battery
How to install:
Tar format Flash Rom Rom via Odin as original
After flashing is done, to restore the original settings 1 again.
Link Download: Google Driver
[/IMG][/IMG][/IMG]

from xda-developers http://ift.tt/1Ub6b26
via IFTTT

Canadian s6 5.1.1 rooted with custom rom , call going voicemail

Hi evryone . I am currently on the xtresto lite rom but this issuse persisted on tyranus rom aswell. This 5.1.1 rom is giving me the issue where randomly calls go straight to voicemail. I read rogers updated the firmware to fix this but since i am on a custom rom i cant take advantage of it. I dont mind returning to stock i jus dont know how. Any help is much appreciated:o

from xda-developers http://ift.tt/1XOSKmu
via IFTTT

CM 12.1 - Freeze and Reboot

Hello, I flashed CM 12.1 and sometimes the system hangs and reboots, the phone is rather in good condition and it was stable on stock. Any ideas?

from xda-developers http://ift.tt/1Ub66LV
via IFTTT

Help my lg g3 beat no have imei

I HAVE A LG G3 BEAT D722P, I MADE A BACKUP TO YOU WITH THE APPLICATION IMEI [LG IMEI BACKUP] ME THEN RESTART THE DEVICE AND WHEN WAS NO SIGNAL IMEI ATTEMPT TO RESTORE BUT REMAINS THE SAME
PLEASE HELP :crying:

from xda-developers http://ift.tt/1XOSILz
via IFTTT

Don't face down your S7/S7 edge on the table... Learn from my lesson..

http://ift.tt/1XOSIer

Well this just happened. DON'T face down you S7/S7 edge on the table, unless it's made of sponge. :(

from xda-developers http://ift.tt/1Ub65HG
via IFTTT

"My Places" edge panel/widget is really useful

I don't know if people already know this, maybe it was already in S6 but I didn't get the S6 so this is new for me. Anyway it's really useful although not for its primary function. Basically it's an edge panel/widget that shows 4 app shortcuts you can have and changes based on your location. The cool thing is it can also change settings like put your phone to vibrate or turn off Wifi. I'm sure there are third-party apps that do this as this is Android, but I've always been somewhat of a purist, I'd use stock as much as possible because there is no ad and no additional background power drain etc..

Check it out.

from xda-developers http://ift.tt/1Ub62f6
via IFTTT

[ME176CX] Kernel Version stay at CN-3.2.23.201 !!

Last week my K013 bricked , so I follow the tutorial below to unbrick:

http://ift.tt/1XOSEve


when I sideload CN-3.2.23.182 ROM , I have some interested in it and OTA to the CN-3.2.23.201 Version..........


but when I flash back to WW-182 ROM , the problems come

--the Kernel Version stay at CN-3.2.23.201 !
So the recovery Version is CN and will brick if it get any WW OTA


I try several way but not work
here is what I try:

acording to the tutorial
http://ift.tt/1XOSEve

1 .I flash into CN-182 ROM but Kernel Version still CN-201

2. flash into WW-182 ROM but Kernel Version still CN-201

3. flash into CN-182 ROM and then flash into WW-182 ROM......still no work

4. flash via IntelAndroid-FBRL-07-24-2015.zip to flash.....still no work , the CWM recovery cannot replace that CN recovery , it change back to CN recovery as soon as it restart

5. I also try
http://ift.tt/1XOSEvg

but it's not work on early version


Is there any way that I could flash my K013 Kernel?

from xda-developers http://ift.tt/1Ub5ZzV
via IFTTT

Change menu button brightness?

I use my Tab in low-light a lot and was wondering if it was possible to lower the brightness on the Back and List buttons. They are a little too bright for my liking, but still need some illumination so I dont fumble around looking for them. I have xposed installed and didn't see anything along the lines I need.

Thanks!

from xda-developers http://ift.tt/1XOSDHN
via IFTTT

I cannot for the love of all that is holy get my computer to notice my nook (nst)

it just wont, the whole system works perfectly fine from boot up to boot down, the usb port is known good, the wire is known good, its just this one thing.

is there a driver i'm missing or a step or a program i'm supposed to use?
i'm at a loss

from xda-developers http://ift.tt/1Ub5Xbi
via IFTTT

Halp cm13

Now i'm using moto e with stock 4.4.4.
I backup using TWRP.
Now i want to install cm13.
Can i restore to stock 4.4.4 by just restoring backup...
Give me a rom suggetion...

from xda-developers http://ift.tt/1XOSCn6
via IFTTT

note 5 stock keyboard request..

can someone share here the stock keyboard of our note 5? i'm on the river rom. help me please.. :rolleyes:

from xda-developers http://ift.tt/1Ub5VjD
via IFTTT

Xposed installer

Please anyone can give me the link of CM 13 for redmi 2 xposed installer apk

Sent from my 2014818

from xda-developers http://ift.tt/1q1vPKf
via IFTTT

Request AlwaysOnDisplay present in Galaxy S7 & Galaxy S7 Edge

Can this feature be ported to Galaxy S6 Edge+ from Galaxy S7/S7 Edge.

from xda-developers http://ift.tt/1SgWJXq
via IFTTT

[MOD][5.1.1][Odex] SystemUI AOSP style with CenterClock Fixed Notification ticker

Hello everyone M2 Users,

I'm here mod SystemUI With AOSP style Look Icons navbar,wifi,signals and toggles

What You Need :
1.Rooted Device .
2.Xperia M2 stock Odex last firmware 5.1.1 .
3.Whitecoffee ;)
Pressing Thanks Button .

How To Install :
1.Download The Zip.
2.Flash via TWRP or CWM or push to the system manually
Correct the permissions => rw-r-r .
Reboot .

Download:

http://ift.tt/1WHo1rt

Tips :
IF You Want to have the AOSP Battery Style, navigate to Settings/Personalization And un-tick " Percentage % "

Credit:
1.abo hani for originally thread z series
2.M2 Indonesia facebook group
etc :good:

Tested:
d2305 M2 stock Odex Lolipop last firmware

ScreenScrotz:
on atachment :D

Attached Thumbnails

     

from xda-developers http://ift.tt/22vfmzf
via IFTTT

My Nexus 6P Pandora Loading Problem Fixed with APN Settings

Alright let me start off by saying that I just got this phone today! So far it's been pretty good I was using a OnePlus One prior so the experience is similar just lest customization than CyanogenMod lol.

Anywho, my OPO used a micro sim card not a nano so I had to go buy one from T-Mobile after that I popped that sucker in and expected everything to work flawlessly... That was not the case though. At first it took a bit to get my LTE signal even then my download speeds were pretty slow but with wifi I downloaded all my apps and I forgot about my LTE issue until I stepped out of the house to go for a run!

I fired up Pandora to listen to some music on my run, to my surprise after I logged in no songs were playing which I found peculiar to say the least since my data was working although it seemed a bit slow, I even googled this issue and found APN settings but it didn't fix my issue... What I figured out was in the APN protocol or IPV settings, it was set to IPV4/IPV6, I tried switching it to simply IPV4. After I saved those settings I lost data connection for a few seconds and as soon as I reconnected my Pandora started loading the music! I'm not sure how that affects data I know nothing about networking and IPV settings but all I know is that switching it to only IPV4 fixed my loading issues, much more snappy and of course my Pandora started working!

I don't know if anyone else has had this problem but all I know is that those IPV settings were stock and I simply changed it to only IPV4 to fix my issue. I hope this might help someone else!

from xda-developers http://ift.tt/1WHo0nm
via IFTTT

nokia X2 stuck after tried to flash using nokia Software recovery tool

hi experts,
my x2 stuck after i tried to install stock rom using nokia software recovery tools when i connect to pc it detects as qaulcomm device please help.

from xda-developers http://ift.tt/22vfmiP
via IFTTT

Youmail and Call Forwarding

Anyone else use Youmail with this phone? I cannot get the phone to get into the "Call Forwarding" section of the phone, as I get "Sim Error or Network Error", I put the sim in my old S4, and I can get Youmail to work and the phone to forward the calls. I am at a loss.

from xda-developers http://ift.tt/1o5GWjK
via IFTTT

Where are apps installed by default in the Huawei Y220?

Hi, I have a Huawei Y220 in which I can't install any apps. I get an error 498. I don't have an external SD cars inside right now. When I check the storage it is divided into two parts: internal SD card (about 9.4 MB available) and internal storage (about 139 MB available). Where are apps supposed to be installed? If it's in the SD card I can see that there is clearly not enough space. But if they have to go into the internal storage, there is still plenty of space for a couple of apps.

Also, when I connect the phone to the PC, I only see the 9.4 MB space. I'm confused with both storages.

Thanks in advance for your help.

from xda-developers http://ift.tt/1UM38wb
via IFTTT

samsung s3 neo (gt i9300i ) not registered on network issue ( only expert)

I am kamran from Pakistan I have issues on my s3 neo ( dual sim) not registered on network issue only in 3g mode but working fine in 2g mode.it is rooted and twrp installed. It searches 3g available networks and takes time after searching when I try to register network it doesn't register .I have flashed it many times and also changed IMEI but same issue so help any expert

from xda-developers http://ift.tt/1o5Ezxd
via IFTTT

Trying to port recovery same chipset mtk6582, lost

One recovery has the file called fstab, and the other one has two: one called fstab.goldfish.mt65xx and another one called fstab.mt65xx, I'm supposed to replace the one in the port with the stock one.
I don´t know what to do, the structure inside fstab and the one in fstab.mt65xx are very similar but the structure is different.

from xda-developers http://ift.tt/1UM3aEb
via IFTTT

any new roms for our x play ?

Any development like multi rom , other os like smartisan os , lewa os ,flyme os, ubuntu touch are under development for our phone ?. I'M not a developer, and i don't know how to do porting roms, anybody interested developers can try.because of all custom roms are cm based or aosp , that's boring...... to be in one rom for more than 10 days.

from xda-developers http://ift.tt/1o5ExFv
via IFTTT

Phone automatically end my call whenever i dial the number and press call. Rare!!!

LG optimus G pro automatic end call. This is an unlocked phone and was working fine till couple day ago. Whenever I dail the number and press call, it will automatic end my call. Did Hard reset and didn't help. Any suggestion?

from xda-developers http://ift.tt/1UM38w9
via IFTTT

Easiest way from v50030a to mm

I have an unrooted gpad 8.3 how to get easiest to cm13 have searched the forum but i am unsure how and in wich order to do it.
I have the korean unrooted lollipop. A step by step that an non tech savvy person can follow would be great.

from xda-developers http://ift.tt/1o5Expf
via IFTTT

Can't reviece text messages/ Can't access Advanced Calling after root

anyone having this problem? I tried to go back to stock but still no luck. When I go to advanced calling it tells me to activate and after pressing there it tells me that you already have it installed. I don't think it's the root version that is causing the problem. It's probably the update that is causing the problem.

from xda-developers http://ift.tt/1UM38w7
via IFTTT

laggy nexus5

Hello all nexus5 users, recently im having huge problems with my nexus5. I was switching from ROm to another but seems problems persist.

- Phone become VERY VERY laggy like unusable laggy (no touch response it seems like freez but its not) and best solution is reboot. It happen to me after one day after installing new ROM after reboot everything is fine but then problem come back soon or later.
- my alarm clock is not wake me up at morning when i wake phone i see launcher reload and alarm clock is like killed (doze?) i did try some tricks like not battery optimize atc.
- accesssibility i have tasker, nova launcher ..aps that need accessibility enabled but they constantly disabling itself after some time with no reason

im dont flashing anything more then ROM+gapps, i have only few apps installed like 30 or so nothing crazy.
im using multirom,ROM i have tried for example Purenexus,Chroma,Dirty Unicorns,Candy...

did anyone experiencing this too? any solution? ill try some more stock ROMs now or complete unroot and flash factory image.
thanks

from xda-developers http://ift.tt/1o5Expb
via IFTTT

Android auto on LG g4 marshmellow

Hi guys,

Like to check if you guys have a working g4 and successfully paired with an android auto head unit.

I just got upgraded to mm and is looking to pair with the pioneer 8750 DVD head unit.

Your answers would be appreciated very much.

Thanks

from xda-developers http://ift.tt/1UM38w5
via IFTTT

Cricket Idol 3 Stock Software Anywhere?

I accidently forgot to move my backup of my Cricket Idol 3 to my PC when I cleared my SD card and now I want to go back to stock and all of my attempts using the tool provided by Alcatel have failed.... So, I was wondering if anyone had a copy of a Cricket Idol 3 Software somewhere. Thanks

from xda-developers http://ift.tt/1o5EwBB
via IFTTT

[MOD][5.1.1][Odex] Settings Xperia X style Stockroom M2

Dear All,

Here is mod Settings Stockroom Lolipop Odex M2 last firmware.

What mod on Settings :
1.Add Xperia X style and icon settings
2.Add Mobile Networks setting on wireless dashboard
3.Add Dualshock series 3&4
4.Add CPU setting and stats
5.Add phone number Assintant
6.Replace Layout menu item
and many more :D


How to install:
1.download and put on sdcard
2.Open whitelist_appops.xml on system/etc/here then open edit and add this value on last
<pkg name="com.sonymobile.numberassistant"/>
3.flash and wipe cache then reboot

Download :

http://ift.tt/1o5EwBt

Credit :
1.Xperia X style guide om didi
2.compare and apk pelengkap om nathan ali ashari
3.MAADR group facebook
4.XDA forum
etc :D

Tested :
my M2 D2305 stock Odex last firmware

ScreenScrot:
on attachment :good:

Attached Thumbnails

       

from xda-developers http://ift.tt/1UM3aE9
via IFTTT

Gear VR Innovation S6 Edition and S7

So I've ended up with an SM-R321 "Innovation Edition" Gear VR unit which is supposedly only for the S6 and S6 Edge. It appears to be working fine with the S7 however, am I missing anything or should I be ok?

from xda-developers http://ift.tt/1o5Exp4
via IFTTT

samsung s3 neo (gt i9300i ) not registered on network issue ( only expert)

I am kamran from Pakistan I have issues on my s3 neo ( dual sim) not registered on network issue only in 3g mode but working fine in 2g mode.it is rooted and twrp installed. It searches 3g available networks and takes time after searching when I try to register network it doesn't register .I have flashed it many times and also changed IMEI but same issue so help any expert

from xda-developers http://ift.tt/25ljelr
via IFTTT

(Q) Stuck BootLogo Sony, broken bootloader

help me,
can only enter fastboot, flash mode does not work

from xda-developers http://ift.tt/1WHl6z1
via IFTTT

[GAME][2.2+] X-Core. Galactic Plague. 1.10

Aliens attack the Earth. Banal you think? But what will you say if you are the one who lead them. Yes, right, you started this war!

Enslave wretched people, general. We had almost conquered the last inhabited planet in the galaxy!
Destroy each country, kill the millions. Explode their tiny aircrafts, make them understand your overwhelming power!
These stupid monkeys don't know what a mighty Empire they face. Lead your troops to victory and each country on the planet will have monuments of yours.
So, what are we gonna do?

Attack the Earth, country by country. You choose by your own the country to start with. Invade silently, so no one suspect a thing, send your spies everywhere. Inhabit the planet peacefully, and then step out of the shadows and disintegrate everyone in your way.

You are the plague of a mankind.

If you like Plague Inc. you should like this game.
Those who don't like XCOM would be happy to trample wretched people underfoot, taking the part of aliens.

Write a feedback on the game, its bugs, gameplay, everything you like or not. We will do our best to improve it.
If you really enjoy the game - put your mark on Google Play.

from xda-developers http://ift.tt/1U7mnl5
via IFTTT

iPega 9023 on Marshmallow

Hi all,

I'm choosing between the official shield controller vs. The iPega 9023 gamepad. Does the latter have any limitations e.g. gamestream, GeForce Now or emulators? Total noob here as i only have had the tablet for 2 weeks and have done nothing but root it. Need your advice.

Sorry if this is a duplicate post. I've been browsing around and have found not much info...

from xda-developers http://ift.tt/1ZqYZ1q
via IFTTT

Nandroid backup question

So I'm used to doing backup of devices in TWRP but it seems that nandroid is the way you do it with these. I downloaded and ran a backup to SD Card. I chose the option for TWRP backup, will that allow me to do a restore of the image I created here from recovery or would i need to install TWRP recovery to recover? If I chose the backup type Clockworkmod would that be restoreable from stock recovery? The directory it created is only 1.6GB w/o compression which doesn't seem right to me.
I did read the idiots guide to root first BTW.
Thanks guys.

from xda-developers http://ift.tt/1U7mjSc
via IFTTT

The outside look catched my eyes!

I bought this tempered glass screen protector for my Nexus 5X and I couldn't be happier ! It was super easy to put on with no problem with bubbles like the plastic film screen protectors that I have used in the past. I will never buy the plastic protectors again after experiencing this glass one. Every time that I buy a new electronic item I dread putting on the screen protector. The bubbles that you cannot get rid of and getting it exactly in the right place is unnerving. This glass protector also will give it protection from dropping or blows to the screen. My old iPad has a cracked screen and I wish that I had put a glass protector on it instead of plastic.

It seems that IPELY is a new brand,to be honest,the outside look catched my eyes when I first saw it,BUT now I find the round edges of 2.5D covers the edges of my phone perfectly and boosts the security of my device at the same time.
Much better than others I have had before, definitely worth the money.[/IMG][/IMG]

from xda-developers http://ift.tt/1ZqYUuu
via IFTTT

LG G3 D855 update help

I have recently bought a used lg g3 d855 (32gb) running kitkat 4.4.2 Its software is of hongkong. Now I want to upgrade to official marshmallow. Do I need to upgrade it first to lollipop?

from xda-developers http://ift.tt/1U7mgWK
via IFTTT

SD card not partitioning adb

Okay so i got ADB installed on my computer. ive been trying to partition the card, (samsung evo) i enter in the prompts in the command terminal and heres what i get

Microsoft Windows [Version 10.0.10586]
(c) 2015 Microsoft Corporation. All rights reserved.

C:\WINDOWS\system32>adb shell
shell@hero2qlteatt:/ $ sm list-disks
disk:179,0
shell@hero2qlteatt:/ $ sm partition disk:179,0 private
shell@hero2qlteatt:/ $

and then my phone says SD card unexpectedly removed.
Any idea where i went wrong? thanks

from xda-developers http://ift.tt/1ZqYRPr
via IFTTT

RE: NES Emulator Development

I wasn't quite sure of where to post this, so if it belongs elsewhere, will an admin/mod please move it where it belongs. Thanks.

This is a post below from infidelity (a well respected NES ROM dev/modder). He states that he hopes that it "spreads around the internet like wildfire", so that this information will hopefully get out to the right people.

The issue for many, in being able to play many of the best and latest NES ROM hacks, is related to whether their favorite (or any emu they try on their preferred platform) has been coded to support (arguably?) the NES' most high performance and capable mapper: MMC5. EverDrive, PowerPAK, etc. owners are currently unable to run these games, as they also haven't implemented the mapper's support, yet.

Btw, on Android, I can confirm that Robert Broglia's NES.emu runs both of these ROMs great. It's a paid app, and well worth the price. There's a free fork of it (not as good, and several revisions back, but certainly a good and capable port). That would be NES.emu Free

Both of these games by infidelity are two of the best NES ROM hacks I've seen released...ever maybe. They're both pretty dang impressive at the very least.

Zelda - The Legend of Link

Super Mario All-Stars NES

I really hope this isn't disregarded as spam. It definitely isn't. I'm not infidelity (or close buddies with him), and have had little interaction with him, for that matter. I just saw read this yesterday, and felt it was important enough to share. Just trying to help spread the info.

Quote:

Originally Posted by infidelity I hope that this gets spread around the internet like wildfire. So that other sites, and forums read this, and understand my actions. So if there are non Acmlm users here that are reading this, by all means share this post, link this post, etc, however it can get across, the more that see it/read it, the better. I've been out of the scene for a few months now, my personal life is more busy than ever. I've been sort of enjoying the fruits of my labor, over my latest two projects, "Zelda - The Legend of Link" & "Super Mario All-Stars NES" The consensus I've come across time and time again on the internet, is the issues people have with my projects on specific emulators, or retropaks/everdrives, etc. So what I am about to do, is name off some things I've read (paraphrasing if you will) and answer them as best I can. But first.... Why I use the MMC5 mapper The MMC5 mapper, is the most impressive & powerful mapper ever created by Nintendo. Some will talk about the Konami mappers being just as powerful, specifically due towards it's audio power, but that's not what I'm after. The MMC5 allows the user to max out the PRG-ROM & CHR-ROM chips to 1024kb's/1mb each, making that game a full 2mb's! That is an exuberant amount of space for a Nintendo game. A vast majority of retail Nintendo games, range from the sizes of 513kb's/769kb's. With 2mb's of size, you have so much freedom in the PRG/CHR department. Speaking purely on the PRG-ROM, take my project "Zelda - The Legend of Link" for example. Without the PRG-ROM being maxed to 1024kb, there would be no Dark World, hell the Light World wouldn't be as big. There would be no advanced sound engine, no additional space for added assembly for enemies, or other various actions such as writing massive amounts of tile tables to the vram engine. Now take my other project "Super Mario All-Stars NES" for example. Without the PRG-ROM being maxed at 1024kb, there is NO WAY, that I would've been able to cram in those 4 games into 1. Speaking purely on the CHR-ROM, again, take ZTLOL for example. Without the CHR-ROM maxed at 1024kb, there would be no fancy CHR Swapping. By now everyone has seen my story introduction, with the Windwaker Link & Ocarina of Time Link. That is all performed by CHR Swapping. Have you ever seen or created a flipbook, using stick figures on each individual page, and on those individual pages, you have the stick figure in a different position each time you flip a page? That's basically what CHR Swapping is, the MMC5 allows you to swap out different CHR pages, to give the appearance of animation taking place. Without that 1024kb's of CHR-ROM space, that introduction would've never seen the light of day. Those two giant paragraphs pretty much sum up why I use the MMC5. It allows for so much creativity for the user to accomplish things, code wise & graphic wise. On top of those things, the MMC5 can allow the user to have 4 individual save pages of $6000-$7FFF! The user can either use that area for actual saving features, or, the user can use it as additional PRG-RAM, or even PRG-ROM! The MMC5 also has very advanced graphical features, making it so instead of a 16x16 block having an individual palette, you can now set all individual 8x8 tiles (like in Super Nintendo) to have their own individual palette! Me personally, I have not utilized that feature, if you want an amazing example of that in action, I highly suggest you look at kuja killer's "Megaman Odyssey." Answers To Some Remarks I've Seen His game doesn't work, it just shows up as garbage Answer: This is the #1 remark I've come across time and time again. There is nothing wrong with my game. The problem is with the emulator the player is using. The emulator obviously lacks the proper emulation of the MMC5 mapper. What is happening, is that the MMC5 reads pages 00-FF for the CHR tiles. But in my game(s), i have 4 individual 00-FF pages. So the emulator does not have that setup properly, causing garbage gfx to appear. Players sometimes like to stick to what they've been using for years & years, and don't like to update, or are just casual rom hack explorers, and find the easiest emulator on the internet they can obtain. In order to play MMC5 games properly, especially enhanced ones, it's recommended to update or obtain, the latest PC versions of FCEUX, Nintendulator, or Nestopia. PC emulators ported over to video game consoles, such as Xbox, PS3, Wii, various handhelds or smartphones, the porter needs to make sure the emulator he/she is porting, has MMC5 capabilities. Why Doesn't He Use MMC3? It's The Most Popular, They Work On Everything. Answer: MMC3 lacks the free space I require for additional PRG-ROM & CHR-ROM. There's no huge explanation for this one. :-/ I Tried This On The N8 Everdrive. It Doesn't Work Answer: The N8 Everdrive (and I believe the Retro PowerPak) uses two 512kb SRAM chips for PRG-ROM & CHR-ROM. I've contacted krikzz, the creator of the Everdrive devices, and he has no desire to revise his device, to incorporate 1024kb PRG/CHR-ROM chips. I even suggested I purchase the same style chips, only 1024kb's each in size, but he said there is more to it than the chips themselves. So enhanced MMC5 games will never work on those devices. It is up to the respected creators. The only way you will ever see these games on actual Nintendo hardware, is by people sacrificing crappy MMC5 games that have the required size, and destroying them so that these enhanced games can replace them. That Mario All-Stars Game. Why Didn't He Insert The Mario World Pirate As Well? Answer: That game alone is 769kb's in size. The 4 Mario games I had inserted into the PRG-ROM, made it impossible for that game to be alongside the others. There also would be no room for any kind of introduction screen, controller function, etc. That's all I pretty much have to say on all of that. I don't have the freedom to rom hack like I used to anymore. I'm not saying that I'm done forever, but I have zero clue as to when i'll ever get back to it. Anyways thanks for letting me get all of this out. :)

Source: http://ift.tt/1ZqYR1Q

from xda-developers http://ift.tt/1U7mehl
via IFTTT

Video record bug

Every time when I try to record a video the camera stops directly at 0.0 sec. Third-party camera apps can record without any error.. only the Google Camera app.

I tried;
- A data/cache wipe;
- Changing the resolution;
- Turning off battery optimization.

Any ideas/suggestions? The phone is fully stock with approx. 15 gb free storage.

from xda-developers http://ift.tt/1U7mf4S
via IFTTT

[APPS] [Huawei EMUi 4.0] For All Phones [New Updates]

EMUi 4.0 APPs



The slightest changes make a huge difference

Email
The special VIP inbox has a dedicated space to manage emails, VIP reminders, and the services that you require.
Automatic subject grouping makes your emails more orderly and reading more simple.
Shortcut gestures and swiping make it much more relaxing to handle emails.
The pixels have been polished to improve the visual effect and produce an optimal screen utilization rate.




Find new music
All new dynamic screen effects and
a music immersion experience so that you can really feel the melody



Videos - Enjoy the best moments

A high-definition audiovisual experience with
reproduction of authentic detail using smooth and satisfying play controls



Hi Cloud - Close association of data

Various basic cloud functions including integrated contact synchronization, data backup, cloud photos,
and phone finder provide consumers with an easier, faster, smarter,
and safer one-stop personal data management service. *HiCloud is available in a limited number of countries.




Huawei File manager

the best ever file manager with a Safe storage (pin security0 to protect the most important files
also with cloud storage

from xda-developers http://ift.tt/1ZqYQej
via IFTTT

Phone not booting in fastboot mode.. How to revive phone without fastboot.?? Plz fast

PHONE NOT BOOTING IN FASTBOOT MODE.. HOW TO REVIVE PHONE WITHOUT FASTBOOT.?? PLZ FAST

I was trying to install stock android on cyanogen device.. with the image of YU5010A.. Coz am such a dumb...!!

plz help me fast... im stuck.. i need my phone back ...

plz cn anyone.???

from xda-developers http://ift.tt/1U7mb5k
via IFTTT

[ISSUE] AUTO ROTATE not working in CM13

After upgrading from cm12.1 to cm13 , auto rotate stopped working for except camera. Is there any possible solutions? :(

from xda-developers http://ift.tt/1ZqYNzc
via IFTTT

request for cifs.ko (Android 4.3 - Kernel 3.4.0+)

I am trying to create cifs mount on my Huawei G630-U10 but it seems my device doesn't enjoy of cifs built-in support. My device is running Android 4.3 with kernel version 3.4.0+. Can you help to find a right version of cifs.ko, md4.ko, nls_utf8.ko for my device ?

from xda-developers http://ift.tt/21GtfF9
via IFTTT

Snapchat stopped working cause of Root....

So guides online for other phones say that you have to uninstall xposed and reinstall it. The problem is I didn't install xposed. It came with the Jasmine 6.1 from the droidyemen team. How do I install it?


Lollipop 5.0 OF1

1 Click Super SU root from androidyemen

Jasmine 6.1 rom

Verizon Note 3

I would appreciate any help. Thanks!

from xda-developers http://ift.tt/1q1odYd
via IFTTT

M8 Brick VZW__001 problem with recovery

Good Afternoon
Can some people can help me with this phone, i dont have recovery/bootloader so what can i do
or what RUU can use?

i tried to flash with sdcard, but always is show FAIL!

this is the info

Code:

---

C:\Users\Benjamin>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: INVALID_VER_INFO
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.55.605.2
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT43ASF03512
(bootloader) imei: xxxxxxxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: xxxxxxxxxxxxxxxx
(bootloader) product: m8_wlv
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B20000
(bootloader) cidnum: VZW__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: fd3e0448
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.078s

C:\Users\Benjamin>

---

i want flash with this file
0P6BIMG_M8_WL_K44_SENSE60_VZW_SECURITY_VERIZON_WWE _Signed_hboot

from xda-developers http://ift.tt/21GtdwU
via IFTTT

HD7 4th Gen w. 5.1.2 - easiest way to get Google Play store only, no other tweaks

I originally posted this in the Fire HD forum, but was told the most up to date procedure was probably here. Is that true?

My situation is this. My main Fire is a Fire 5th Gen (the $49 one), and I got comfortable with using it JUST with Google Play installed and no other tweaks. I used the Rootjunky Supertool program and ADB to do that under 5.1.1.

I just got, as a secondary device, a used HD7 4th Gen. The previous owner must have had it upgrade to 5.1.2 recently, because that's what it came with. I'm aware that there are (probably even more reliable that with the 5th Gen) ways to back-apply FireOS4 and get the thing rooted without bricking it, but... at this point I'm not ready for that. Like with my Gen5 I just want Google Play on it.

What I don't know is if the current tools around to do that (like the Supertool) will WORK with an HD7 4th Gen and 5.1.2. I've been told in a general sort of manner that the procedure just to get a non-rooted Play store install should be "the same" as for the 5th Gen device, but that doesn't say to me that the Supertool would work. Or does it (since it just says "5th Generation" on it's descriptions)? And if not, what other took or script does?

I will say I already have Developer Mode and ADB access turned on, and even have a copy of ES File Manager from the Amazon Store on the HD7-4thGen, suspecting that one or both of those would come in handy. So what's next?

Thanks!

from xda-developers http://ift.tt/1q1odY9
via IFTTT

MIUI 7 (Official) for Moto X Play

Hi,

If any MIUI developer is viewing this.

i would be realy happy to hear that Moto X Play (Motorola Flagship phone) in MIUI 7 list.

Kindly make it for me and many alike me a MIUI lover.

Regards,
Kejas Shah:):):):)

from xda-developers http://ift.tt/1MBivRx
via IFTTT

No sound or microphone outside of a phone call

No audio comes across speaker while playing music, etc.. Microphone also only works in a call. Google Now, etc. can't hear me talk.

I've tried different firmwares(via odin), kernels, and roms. No luck. Tried on both Lollipop and Marsh mellow. Anyone seen anything like this or have any ideas on solution? I figure its got to be software related since the speaker/mic work in the phone app once a call is initiated.

from xda-developers http://ift.tt/1RfnmgK
via IFTTT

Hoping to help get root at least

Here are some files I found if there is a specific directory you need to see I'll try to get access to it all you need to do is post the dir here

http://ift.tt/1RfniO2

from xda-developers http://ift.tt/1MBiv3U
via IFTTT

dumb question thats probably been asked several times

i have a sprint samsung galaxy s6 , my question is, are there certain roms that are compatible with the s6 and the s6 edge ? or are they all compatible ? or are they comletely different devices? also if they are , what are the differences? other than the obvious rounded edge?

from xda-developers http://ift.tt/1RfnlcC
via IFTTT

[ROM][6.0.1][OFFICIAL] Cardinal-AOSP 1.0 [sprout4 & sprout8]

TEAM CARDINAL PRESENTS
Cardinal-AOSP

Cardinal-AOSP is a Custom ROM based on AOSPB. Built with Uber toolchain, and minimal customizations, the main aim of this ROM is deliver light speed performance, smoothness and good battery backup. I hope that you'll love this project, and help us in making it even more better.

Cardinal AOSP Downloads Folder

Click Here !

Flashing Instruction

• Download ROM and GApps (optional)

• Reboot to recovery and Backup existing ROM

• Wipe System, Data, ART cache, Cache

• flash ROM and Gapps and reboot...

Source tree : Team-Cardinal
Officially Supported Device trees: Cardinal-Devices

Credits
AOSPB
SlimROMs
CyanogenMoD
TipsyOS
OrionOS
@prince trishi
@zeeshanhussain12
@srisurya95
& @Miraditta015 for testing the ROM :p
Without them, this project could never be possible,

G+ Community Link

XDA:DevDB Information
CARDINAL-AOSP, ROM for the OEM Cross Device Development

Contributors
akxt1022
Source Code: Source Code: http://ift.tt/1Rfni0m

ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, Custom recovery
Based On: AOSPB (SLIM)

Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2016-03-23

Created 2016-03-23
Last Updated 2016-03-23

from xda-developers http://ift.tt/1MBitZU
via IFTTT

looking for some assistance.

basically, i live in australia and lately the centrelink website has been really unreliable, so i figured i would use an android emu platform to run the centrelink express plus app, the problem is no matter what i have tried, none of them will let me set it up... wondering if anyone has any ideas on why i can't run it on any of the emu platforms i have tried, used genymotion, andy, bluestacks and NOX, i get to the point where i need to answer one of my secret questions, but there is no button to click or anything once i get that far so i can't use the app at all....

from xda-developers http://ift.tt/1MltB2e
via IFTTT

Galaxy Note 10.1 N8013 Charging Problem

Hey guys,

I have a completely stock N8013. Recently, I've been charging the device but the % indicator stays the same even if charged for 10+ hours. I'm now down to 7%. I downloaded Ampere and I tried plugging into the wall socket and got around 1400mA, while on my laptop I got around 900mA, so I think the brick+cable are working. I also downloaded Repair Battery which IDed that about 5% of my cells were "bad" but it "fixed" that. Any ideas?

from xda-developers http://ift.tt/1RiWH1f
via IFTTT

Car's OBD2 bluetooth connection drops when I hang up a call

I've had this problem on my last phone as well, not just the Nexus 6P, but I'm wondering if anyone can help me troubleshoot this REALLY annoying issue.

In my car, I have an OBD2 sensor that I use with Dash. It works great while Spotify streaming to my car stereo. It even works fine during a phone call (Spotify pauses), but Dash continues to work while I'm talking on the phone.

The second I end the call, my connection to the OBD2 sensor drops and I have to reconnect the app to the OBD2 sensor. The Bluetooth connection continues working fine for streaming music and phone calls, but the OBD2 to app connection drops. VERY rarely, I end the call, and it continues working as expected.

I don't know if it's the actual OBD2 adapter causing the problem, if it's the phone, or if it's the Dash app. This has been an issue with my Galaxy S6 AND my Nexus 6P, but it was never an issue with my old Samsung Galaxy S3.

Can anyone help troubleshoot? Could it be a ram issue? Too many background apps?

Any help would be appreciated!

from xda-developers http://ift.tt/1pHwBfr
via IFTTT

Google play and google account problem.. PLEASE HELP!

Hi..
I have had this problem since I bought my Wifi-only LG G Pad 7 tablet (v400)*
android version 4.4.2
Here's what's going on.. When I sign in a new Google account.. I type my Email address.. Press next and then it shows loading (or the moving line) forever.. I somehow managed to sing in.. When opening Play Store it gives me all the apps and stuff.. When I press install it shows the download notification and nothing happens.. It keeps saying "downloading" forever.. It's not a WiFi issue.. Tens of Android devices I have tried on the same Wifi and they never had any of these issues..*
When I open a VPN app (Hotspot Shield) everything works as it should.. It signs in and downloads perfectly.. But I can't connect to a VPN every time I need to download/update an app.. Here's the things that I have tried so far.. BTW I tried EVERYTHING!!
1) Cleared Data and cache of Play Store and every single Google app..
2) Factory Reset the tablet..
3) Deleted the hosts file (system/etc/hosts) and tried to edit it (put # before the lines)
4) I even installed CM12.1 (two different ROMs) and different GApps.. With wiping everything .. And the same issue happened!!!
5) Tried to play a little with Market Unlocker app..*

PLEASE PLEASE give me suggestions.. I really need to solve this forever.. Thanks in advance..*

Kindly press thanks if I helped :)

from xda-developers http://ift.tt/1pHwD76
via IFTTT

RedeemCode giveaway

If you have an Android OS running phone you have an advantage here ,this developer is giving up free promo codes to make his app visible ,you can benefit from it ,the name of the app is EZ Notes .
If you want the promo code of the app just email the developer saying "I would like to have promocode of Ez Notes"
His email amadani@pristineusa.com
App link : http://ift.tt/1A1wwp2

you will get promocodes as soon as you mail him just go to play store and say redeem code and u have that paid app for free on your Android device :)
-Regards

from xda-developers http://ift.tt/1RiWCdS
via IFTTT

Ram expander creates problem....

I have Yu yunique It has 1 gb of Ram.
So i found that there is a way for increasing Ram and that is Ram expander so i root my phone and install Ram expander. I've done all the things that is required to expand the Ram. But after this step i found that the phone becomes more unstable it lags more.. So i uninstall the app. Why this thing Happening.. My Yunique running on Cm 12.1 also is there any other way for optimise the phone for better performance...

from xda-developers http://ift.tt/1pHwCAb
via IFTTT

Phone seems to turn on, but screen completely dark.

Hi,

My S4 SGH-M919 is having a problem where it appears to turn on, charge, and boot to the OS, but there is no response from the screen. The bottom buttons illuminate but the screen doesn't want to turn on. I've tried removing the battery and holding the power button down for an X-number of seconds, but this doesn't seem to do the trick.

Any ideas?


Thanks.

from xda-developers http://ift.tt/1RiWz1z
via IFTTT

Newbie question: How do I upgrade my CM Fire phone version?

Hi.

How do I upgrade my CM Fire phone version?
Been happily running CM11 on my phone for a few months.
I was looking for updates through Settings -> About phone -> CyanogenMod updates, but it kept stating no new updates available.
When I checked today this forum, I realized there are updates available, but I could not find instructions for updating the Fire phone (only found for fresh install).

So, how do I update the phone ?
Instructions, links or hints would be highly appreciated.

TIA,
Zeevik

from xda-developers http://ift.tt/1pHwC38
via IFTTT

Nexus 5X Problem

Hi,

I have a problem with my Nexus 5x,
After installed Android N, I decided to go back to 6.0.1
So I unroll my device, downloaded the Marshmallow and after the installation when the phone is trying to turn on it starts to block, right after the GOOGLE logo and starts over, so all I can do is to let it starts over and over and over ...

Please advise

Thank you

from xda-developers http://ift.tt/1RiWwTr
via IFTTT

Optimal NVS optmus gpu performance

Which is the best for performance and opengl es 3x support? given that Ferrmi cards aren't going be supported by the vulkan api by nvidia drivers.

1. To disable optimus and run the nvidia gpu using their Linux driver.
2. Same as above but run with Gallium driver.
3. Same as above but with Nouveau driver.
4. Bumblebee - is this even supported by Remix OS?
5. PRIME - Same question as Bumblebee is it supported?

I managed enable the nvidia gpu whilst in optimus mode using
nomodeset i915.modeset=0 nouveau.modeset=0 which ran Gallium llvmpipe but the performance was dreadful and the resolution was lowered, is Gallium llvmpipe a software renderer? is their a way to run Gallium hardware rendering the same as Intel gpu or is Nouveau the proper usage scenario?
Remix OS kept crashing using just i915.modeset=0 nouveau.modeset=1 and Aida64 stalled / locked up but ran without problem using the Intel gpu.

from xda-developers http://ift.tt/1pHwzV1
via IFTTT

possible to deodex?

can anybody tell me if we can deodex our rom now that we have root? doesnt matter if it is using a pc or from within

from xda-developers http://ift.tt/1WEAtrT
via IFTTT

SD CARD + 2 SIMs mod

I just wanted to share a mod to use an SD Card with 2 sim cards at the same time. It takes about 10 minutes. Refer to pics.

1. Hold the SIM with a pair of pliers and heat the plastic part under the chip with a tiny flame or an electric burner to remove the white plastic around the chip ( make a note of where the SIM indentation is, you need to glue the chip to the sd card in the correct position)

2. Lightly file the top of the sd card with a nail filer ( only remove the part that is a little thicker) please do so very lightly as if you do it too much it will damage your card.

3. Glue the SIM chip to the sd card and insert it into the phone. It might be a bit tight but it should go in easily without much effort.

The first time I did it my phone didn't recognize the second SIM but I removed it and fix the position a little bit and it works perfectly.

Attached Thumbnails

       

from xda-developers http://ift.tt/1pGXe4d
via IFTTT

[GUIDE] How to build Marshmallow Custom ROMs for Galaxy Note 2

Hello everyone,

today I will present you the ultimate guide for how to build Android Marshmallow for our Galaxy Note 2. Thid guide can be only used for GT-N7100.
Let's start :D

What you'll need

• PC with Linux
• At least 4GB RAM
• 100GB hard disk or SSD
• Linux 64-Bit

1:Open the Terminal and copy the following into:

Code:

---

sudo apt-get install bison build-essential curl flex git gnupg gperf libesd0-dev liblz4-tool libncurses5-dev libsdl1.2-dev libwxgtk2.8-dev libxml2 libxml2-utils lzop maven openjdk-7-jdk openjdk-7-jre pngcrush schedtool squashfs-tools xsltproc zip zlib1g-dev

---

2.After installing the modules, you will need to create some directorys

Code:

---

mkdir -p ~/bin

---

3. Now we should install repo. You will need repo to sync all the souece code (17GB)

Code:

---

curl http://ift.tt/1mQuHPR > ~/bin/repochmod a+x ~/bin/repo

---

Now the preparations are all done. This guide will be split up into the ROM sections now.

from xda-developers http://ift.tt/1LCWAP3
via IFTTT