So my device had been running kinda slow, so I decided I wanted to restore my device back to stock.
For as long as I can remember with any device I have always just flashed the stock firmware instead of factory resetting the device.
It has never been a problem, until now.
I have tried both kies 2.6, kies 3 & samsung smart switch recovery modes, and upgrade/initialization modes. Firmware Recovery hasn't been visible in any of them, and upgrade/initialize has failed in all.
I have tried both versions of 3.07 & 3.10.7 of Odin using the Stock firmware found at Sammobile.
I have tried: 2 different usb cables & 2 different usb ports.
None of these methods are working, was wondering if maybe I'm doing something wrong?
I'm getting stopped with message 'Secure Check Fail: system'
This device has a locked boot-loader....But as far as I know that is irrelevant when flashing stock firmware. Am I wrong?
When flashing the entire firmware...
Odin Log Output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I also extracted the .tar.md5 and attempted flashing just the /system...
When attempting to flash only system.ext4
Here is my Odin log output:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Edit:
I forgot to mention when attempting to restore with smart switch the download mode error listed is
SW REV CHECK FAIL : Fused 2 > Binary 1
Any assistance would be greatly appreciated, thanks for your time!
For as long as I can remember with any device I have always just flashed the stock firmware instead of factory resetting the device.
It has never been a problem, until now.
I have tried both kies 2.6, kies 3 & samsung smart switch recovery modes, and upgrade/initialization modes. Firmware Recovery hasn't been visible in any of them, and upgrade/initialize has failed in all.
I have tried both versions of 3.07 & 3.10.7 of Odin using the Stock firmware found at Sammobile.
I have tried: 2 different usb cables & 2 different usb ports.
None of these methods are working, was wondering if maybe I'm doing something wrong?
I'm getting stopped with message 'Secure Check Fail: system'
This device has a locked boot-loader....But as far as I know that is irrelevant when flashing stock firmware. Am I wrong?
When flashing the entire firmware...
Odin Log Output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I also extracted the .tar.md5 and attempted flashing just the /system...
When attempting to flash only system.ext4
Here is my Odin log output:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Edit:
I forgot to mention when attempting to restore with smart switch the download mode error listed is
SW REV CHECK FAIL : Fused 2 > Binary 1
Any assistance would be greatly appreciated, thanks for your time!
from xda-developers http://ift.tt/21HA7Y3
via IFTTT
No comments:
Post a Comment